Table of Contents
Advertisement
Changing the charcoal filter
To ensure the best performance of your extractor, you should replace
the charcoal filter every three to six months, depending on the
frequency of use and the style of cooking. To attach new charcoal
filters, first remove the grease filter(s) as described on the previous
page. O er up the charcoal filters to the sides of the motor as shown in
figure 3, turning it clockwise until it locks in place.
Fig 3.
Please note thatcharcoal filters are only required when the extractor is
being used in recirculation mode. Charcoal filters are not supplied and
are available to purchase from our Customer Care team.
10 | Instruction Manual
Advertisement
Table of Contents
