Changing A Charcoal Filter - CDA ECH Series Directions For Installation, Use And Maintenance

Please note that cleaning the grease filter(s) in a dishwasher may
cause the filters to discolour. This is normal and does not constitute a
fault with the appliance.
Changing the charcoal filter
To ensure the best performance of your extractor, you should replace
the charcoal filter every three to six months, depending on the frequency
of use and the style of cooking. To attach new charcoal filters, first
remove the grease filter(s) as described on the previous page. Offer up
the charcoal filters to the sides of the motor as shown in figure 3, turning
it clockwise until it locks in place.
Fig 3.
Please note that charcoal filters are only required when the extractor
is being used in recirculation mode. Charcoal filters are not supplied and
are available to purchase from our Customer Care team
8 | Instruction Manual