Care And Maintenance; Cleaning The Grease Filter - CDA CCA51 Installation, Use And Maintenance Manual

Care and maintenance

IMPORTANT: DO NOT PERFORM MAINTENANCE OR CLEANING
OF THE EXTRACTOR WITHOUT FIRST SWITCHING OFF THE
ELECTRICITY SUPPLY. PROTECT ALL AREAS SURROUNDING
THE EXTRACTOR WHEN PERFORMING ANY CLEANING OR
MAINTENANCE.
Cleaning
You should use a non-abrasive cleaner. Any abrasive cleaner
(including Cif) will scratch the surface and could erase the control
panel markings.
You can clean you extractor effectively by simply using a dilute
solution of water and mild detergent and drying to a shine with a
clean cloth such as a microfibre cloth.

Cleaning the grease filter

The grease filter should be kept clean to minimize the risk of fire.
At least once a month you should remove and clean the grease filter
with hot soapy water.
To remove the grease filter,
follow the steps below (and on
page 8):
1. Unfasten the securing
screws (S in Fig 2) on either
side of the cover panel and
the cover panel will come
off. Take care not to drop it.
Fig. 2
S
7