Introduction And Safety; Purpose Of This Operating Guide; Additional Resources; Safety Symbols - Danfoss iC7 Series Operating Manual

iC7 Series Modbus
Operating Guide

1 Introduction and Safety

1.1 Purpose of this Operating Guide

This operating guide provides information about configuring the system, controlling the drive, accessing parameters, configuring,
troubleshooting, and some typical application examples.
The operating guide is intended for use by qualified personnel, who are familiar with the iC7 drives, Modbus TCP technology, and
the PC or PLC that is used as a master in the system.
Read the instructions before configuring Modbus TCP, and follow the procedures in this guide.

1.2 Additional Resources

Additional resources are available to help understand the features, and safely install and operate the iC7 products:
• The safety guide, which provides important safety information related to installing iC7 drives.
• The installation guides, which cover the mechanical and electrical installation of drives, functional extension options, or other
extra components.
• The application guides, which provide instructions on setting up the drive for a specific end-use.
• Facts Worth Knowing about AC Drives, available for download on www.danfoss.com.
• Other supplemental publications, drawings, and guides are available at
tion/.
Latest versions of Danfoss product documentation are available for download at http://drives.danfoss.com/downloads/portal/.

1.3 Safety Symbols

The following symbols are used in this guide:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).

1.4 Qualified Personnel

Correct and reliable transport, storage, installation, operation, and maintenance are required for the trouble-free and safe operation
of the drive. Only qualified personnel are allowed to install and operate this equipment.
Qualified personnel are defined as trained staff, who are authorized to install, commission, and maintain equipment, systems, and
circuits in accordance with pertinent laws and regulations. Also, the qualified personnel must be familiar with the instructions and
safety measures described in this manual.

1.5 Safety Precautions

HIGH VOLTAGE
AC drives contain high voltage when connected to AC mains input, DC supply, or load sharing. Failure to perform installation,
start-up, and maintenance by qualified personnel can result in death or serious injury.
-
Only qualified personnel must perform installation, start-up, and maintenance.
Danfoss A/S © 2023.09
www.danfoss.com/service-and-support/documenta-
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
W A R N I N G
Introduction and Safety
AQ456329149698en-000101 / 136R0334 | 5