Design and principle of operation
3.2 Technical data
The nameplates for the components used
provide information on the component ver-
sions (see the 'Markings on the device' sec-
tion).
Note
More information is available in Data Sheet
u T 2540.
Conformity
The Type 2404-2 Regulator bears both the
CE and EAC marks of conformity.
Process medium and scope of application
The Type 2404-2 Excess Pressure Valve with
pilot valve for small set point ranges is used
to maintain the tank pressure to an adjusted
set point.
− For gases
− Medium temperature range
–5 to +195 °F/–20 to +90 °C
− Set points
0.075 to 3 psi/5 to 200 mbar
− Valve sizes
NPS 2½ to 16/DN 65 to 400
− Pressure rating
Class 125, 150, 300/PN 16, 40
3-4
Leakage class
The soft-seated regulator has the leakage
class IV according to IEC 60534-4.
Noise emissions
SAMSON is unable to make general state-
ments about noise emissions. The noise emis-
sions depend on the regulator version, plant
facilities, process medium and operating
conditions.
Dimensions and weights
Table 3-8 and Table 3-9 provide an over-
view of the dimensions and weights. The
lengths and heights in the dimensional draw-
ings are shown on page 3-9 onwards.
EB 2540 EN