Table of Contents
Advertisement
Symptom
No audio playback
on one channel
한 한 쪽 스피커에서
소리 안남
Poor sound quality
음질이 나빠짐 .
전원 험 노이즈
Humming low
frequency noise is
audible, even as no audio
source is playing back
Frequency response:
Nominal Output Voltage:
Total Harmonic Distortion:
Input sensitivity:
Signal to Noise Ratio:
Input Impedance:
AC power connection type:
Inputs:
Outputs:
Dimensions:
Weight:
Colour:
Tubes:
Vincent
38
이상 증상 대처요령
Possible Cause
소 소 스 기기 이상
The source equipment is
giving signal on only one channel.
소스기기와 프리앰프 연결 불량
the signal cables between audio sour-ce and
preamplifier inputs has not yet been plugged in
or is defective.
프리앰프와 메인앰프 연결 불량
more audio signal cables between pre- and
main amplifier are defect or one of the plug
connections is loose.
메인앰프와 스피커 연결 불량 또는 스
피커 불량
One of the speaker cables is not
correctly connected to the main amplifier or is
defective.
케이블 연결이 느슨해짐. 연결단자 불량
The cable connections are not tight, the con-
nectors are dirty or a cable is defective.
톤 콘트롤 설정 불량
"TREBLE" or"BASS" have not been selected
correctly.
턴테이블을 직접 연결함
has been connected to a line level input without
using a phono preamplifier.
위 "전원 노이즈" 참조 바랍니다.
See section "Net frequency noise" in
the chapter "Tips".
제품 사양
TECHNICAL SPECIFICATIONS
SEARCH FOR ERRORS
Countermeasure
소스기기 확인
can try to use itat a different amplifier for a test.
One of
소스기기와 프리앰프 연결 확인
cable connections, tighten them if necessary.
메인앰프 연결 확인
One or
cable connections.
스피커 연결 확인
speaker cables at the speaker terminal of the main
amplifier and at the speaker's connectors.
연결단지 및 케이블 확인
cables and cable connections.
The tone settings
톤 콘트롤 확인
selected there.
A record player
포노 프리앰프 추가 사용
a phono preamplifier.
위 "전원 노이즈" 참조 바랍니다.
See section "Net frequency noise" in the
chapter "Tips".
20 Hz - 20 kHz ±0.5 dB
2 V
< 0.1% (1 kHz, 1 W)
500 mV
> 90 dB
47 kΩ
5 x RCA stereo (LINE IN), 1 x XLR-IN
2 x RCA stereo (PRE OUT), 1x XLR-OUT
1 x RCA stereo (REC OUT),
1 x Power Control
430 x 77 x 360 mm
6,2 kg
silver / black
4x 6H16
Check the audio source. You
Check the
Check and tighten all
Check and refasten the
Check the
Check the settings
Interconnect
Advertisement
Table of Contents
