Installation and settings
15. Mount the cable holders
16. Mount the slider
Fig. 8:
17. Affix the new labels as shown in
Label 80 80 882 for the live monitor.
Label 80 80 890 for the reference monitor.
18. Reattach all covers and switch the system on.
Final work steps
1. Perform a functional check.
2. Check the image on all connected live and reference monitors.
Siemens AG
Medical Solutions
(1/Fig. 7 / p. 10)
(2/Fig. 7 / p. 10)
Labels_
SPR2-310.814.05.02.02
01.05
from the old rear cover on the new rear cover.
on the new rear cover.
(Fig. 8 / p.
11).
Page 11 of 12
CS SD 24
11
0
ARCADIS