Wiring
This section contains the block diagram of the module and outlines various wiring options.
You will find information on wiring the front connector, establishing a cable shield, etc in the
S7-1500/ET 200MP system manual
(http://support.automation.siemens.com/WW/view/en/59191792) in section Wiring.
Block diagram and terminal assignment
The example in the following figure shows the terminal assignment and the assignment of
the channels. The individual channels are connected with a relay.
Digital output module DQ 16x230VAC/2A ST Relay (6ES7522-5HH00-0AB0)
Manual, 03/2015, A5E34934019-AA
3
11