Siemens SIMATIC S7-1500 Manual page 10

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● 16 digital outputs (relays)
● Supply voltage of the 24 V DC relay coils
● Rated output voltage 230 V AC (24 V DC up to 120 V DC/24 V AC up to 230 V AC)
● Rated output current 2A (per channel)
● Configurable substitute values (per channel)
● Configurable diagnostics
● Suitable for solenoid valves, DC contactors, and indicator lights
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Reconfiguration in RUN
Module-internal Shared Output (MSO)
Configurable submodules / submodules for
Shared Device
You can configure the module with STEP 7 and with a GSD file.
Accessories
The following accessories are supplied with the module and can also be ordered separately
as spare parts:
● Labeling strips
● U connector
● Universal front door
Other components
The following component must be ordered separately:
Front connectors, including potential jumpers and cable ties
For more information on accessories, refer to the S7-1500/ET 200MP system manual
(http://support.automation.siemens.com/WW/view/en/59191792).
10
Firmware version
of the module V13, SP1 or higher
with HSP 0119
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
(PROFINET IO only)
V1.0.0 or higher
(PROFINET IO only)
Digital output module DQ 16x230VAC/2A ST Relay (6ES7522-5HH00-0AB0)
Configuration software
STEP 7
STEP 7 V12 or higher or
STEP 7 V5.5 SP3 or higher
X
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
Manual, 03/2015, A5E34934019-AA
GSD file in
--- / X
--- / X
X
X
X