Declaration Of Parameters; Address Space - Siemens SIMATIC S7-1500 Manual

4.2

Declaration of parameters

No supply voltage L+
Enabling of the diagnostics at no or insufficient supply voltage L+.
Reaction to CPU STOP
Determines the reaction of the output to the CPU going into STOP state or when the
connection to the CPU is interrupted.
4.3

Address space

The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image output/input.
Configuration options of DQ 16x230VAC/2A ST
You can configure the module with STEP 7 or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different short designations/module names.
The following configurations are possible:
Table 4- 2 Configuration options
Configuration
1 x 16-channel without value status
1 x 16-channel with value status
2 x 8-channel without value status
2 x 8-channel with value status
1 x 16-channel with value status for
module-internal Shared Output with
up to 4 submodules
Digital output module DQ 16x230VAC/2A ST Relay (6ES7522-5HH00-0AB0)
Manual, 03/2015, A5E34934019-AA
Short designation/module
name in the GSD file
DQ 16x230VAC/2A ST
DQ 16x230VAC/2A ST QI
DQ 16x230VAC/2A ST S
DQ 16x230VAC/2A ST S QI
DQ 16x230VAC/2A ST MSO
Parameters/address space
4.2 Declaration of parameters
Configuration software, e.g., STEP 7
Integrated in hardware
catalog STEP 7 V13,
SP1 or higher with
HSP 0119
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)
GSD file in
STEP 7 as of V12 or
STEP 7
as of V5.5 SP3
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)
15