Garmin GTN 725 Cockpit Reference Manual page 94

Message
REMOTE KEY
STUCK -
NAV remote
transfer key is
stuck.
REMOTE KEY
STUCK -
Pilot/Co-Pilot voice
command push-
to-command key is
stuck.
REMOTE KEY
STUCK -
Remote CDI key is
stuck.
REMOTE KEY
STUCK -
Remote go around
key is stuck.
84
Description
The remote NAV transfer
(NAV RMT XFR) key/
switch has been in pressed
position for at least 30
seconds. This input will
now be ignored. This
input is not available in all
installations.
The remote push-to-
command key/switch has
been in pressed position
for at least
30 seconds. This input
will now be ignored. This
input is not available in all
installations.
The remote CDI (CDI SRC
SEL) key/switch has been
in pressed position for at
least
30 seconds. This input
will now be ignored. This
input is not available in all
installations.
The remote go around
(RMT GO ARND) key/
switch has been in pressed
position for at least 30
seconds. This input will
now be ignored. This
input is not available in all
installations.
GTN 725/750 Cockpit Reference Guide
Action
Verify the NAV RMT XFR key/switch is
not stuck. Contact dealer for service if
this message persists.
Verify the push-to-command key/switch
is not stuck. Contact dealer for service if
this message persists.
Verify the CDI SRC SEL key/switch is not
stuck. Contact dealer for service if this
message persists.
Verify the RMT GO ARND key/switch is
not stuck. Contact dealer for service if
this message persists.
190-01007-04 Rev. L