Gtn-Gns Crossfilling - Garmin GTN 725 Cockpit Reference Manual

GTN-GNS Crossfilling
• GTN to GNS – Active flight plans, active Direct-To, User waypoints
• GNS to GTN – User waypoints
1. While viewing the System Setup page, touch the GNS Crossfill Settings
to reach the GNS Crossfill settings.
key
2. Touch Auto GNS Crossfill to enable Crossfill and send the Active Flight
Plans and the active Direct-To course to the GNS unit.
3. Touch the Transfer User Waypoints key to transfer the User Waypoints
from the GTN unit to the connected GNS unit.
NOTE: When the active flight plan on the GTN contains legs or features
that are not supported by the GNS, those legs will not be crossfilled and
will not be present in the active flight plan on the GNS.
54
GTN-GNS Crossfill Selection
GTN-GNS Crossfill
GTN 725/750 Cockpit Reference Guide
Touch OK to enable Auto
Crossfill with dual units.
Touch OK to manually
transfer user waypoints.
Transfer of user
waypoints in progress.
190-01007-04 Rev. L