Advertisement
3.2.
Indoor Unit Installation Space Requirements
NOTICE:
•
All dimensions are listed in millimetres (mm), unless otherwise specified.
3.3.
Indoor Unit Installation
a.
Installation Location Requirements
•
Ensure the hanger is strong enough to withstand the weight of the unit.
•
Ensure condensate drain pipe has enough fall to ensure good drainage flow.
•
Ensure no obstructions to the inlet / outlet grille and adequate air circulation.
•
Ensure the minimum clearances shown in Fig.2 are provided for maintenance access.
•
Locate the unit away from heat sources, flammable or explosive substances, or smog.
•
The unit is a concealed ceiling unit and should be mounted in the ceiling space, with appropriate
access provided.
•
The power cables and connection wiring of the indoor and outdoor units must be at least 1m
away from TVs or radios to avoid interference and noise (the unit may still cause interference at
greater distances).
13 23 50
|
lennoxaus.com.au
Figure 2: Indoor Unit Installation Space Requirements
LENNOX MULTI SPLIT INVERTER
Slim Line Ducted Indoor Unit
9
Advertisement
