Advertisement
b.
Installation of the Indoor Unit
1.
Drill hole suitable for the M10 expansion bolt. Insert the M10 expansion bolt into the hole, and then
knock the nail into the bolt. Refer to the drawings for the distance between holes and see Figure 3
for the installation of the expansion bolt.
2.
Install the hanger on the indoor unit, as shown in Figure 4.
3.
Install the indoor unit on the ceiling, as shown in Figure 5.
10
Figure 3: Installation of the Expansion Bolt
Figure 4: Installing the Hanger
Figure 5: Installing the Indoor Unit
LENNOX MULTI SPLIT INVERTER
Slim Line Ducted Indoor Unit
13 23 50
|
lennoxaus.com.au
Advertisement
