ZyXEL Communications NR2301 User Manual page 26

Table 9 Menus Summary (continued)
LINK TAB
APP MODULE Status
Statistics
Network Information Use this screen to view the NR2301's network information.
Network Settings
Network Operators
DHCP
Package Settings
Firewall
IP Filter
URL Filter
Port Forward
Port Trigger
Port Filter
UPnP
Remote
DMZ Settings
VPN
Messages
PIN Settings
Admin Settings
Update
Online Update
Firmware
Management
Configuration
Backup
Device Reboot
Diagnosis
WPS
DDNS
VPN Passthrough
Power Save
Chapter 2 Web Configurator
DESCRIPTION
Use this screen to view the NR2301's device status and information.
Use this screen to view the SIM card's usage details.
Use this screen to configure the NR2301's network, APN, and roaming
settings.
Use this screen to view available PLMNs and select your preferred
network.
Use this screen to configure DHCP settings on the NR2301.
Use this screen to set up a limited allowance of data on the NR2301.
Use these screens to configure IP and URL filters, port forward, port
trigger, UPnP, remote management, and DMZ.
Use this screen to configure IP filter settings to block clients from
accessing specific Internet services.
Use this screen to configure URL filtering settings to block the users on
your network from accessing certain web sites.
Use this screen to forward incoming service requests to specific servers
on your local network.
Use this screen to change your NR2301's trigger port settings.
Use this screen to enable and create firewall rules to block unwanted
traffic.
Use this screen to enable or disable UPnP on the NR2301.
Use this screen to allow or forbid WAN users from pinging or configuring
the NR2301.
Use this screen to enable DMZ on the NR2301.
Use this screen to configure VPN client settings on the NR2301.
Use this screen to view and manage SMS messages on the NR2301.
Use this screen to enable PIN code authentication on the NR2301.
Use this screen to configure the NR2301's password and timeout
settings.
Use these screens to display the current firmware version and update
new firmware to the NR2301.
Use this screen to display the current firmware version and check for
firmware updates.
Use this screen to upload new firmware to the NR2301.
Use this screen to backup and restore the configuration or reset the
factory defaults to your NR2301.
This screen allows you to reboot the NR2301 without turning the power
off. You can also set a schedule to reboot the NR2301
Use this screen to check the WiFi and status of the NR2301.
Use this screen to configure and use WPS.
Use this screen to set up dynamic DNS.
Use this screen to enable or disable L2TP, IPSec, and PPTP on the
NR2301.
Use this screen to configure the NR2301's sleep mode.
NR2301 User's Guide
26