ZyXEL Communications NR2301 User Manual page 29

3.2.2.1 WPS Push Button Configuration (PBC)
This example shows how to connect to the NR2301's WiFi network from a notebook computer running
Windows 10.
Make sure that your NR2301 is turned on, and your notebook is within range of the NR2301's WiFi signal.
1
Log into the NR2301's Web Configurator, and then go to the APP MODULE > WPS screen. Enable WPS (A)
2
and click Apply (B). Then click Start in the PBC section (C).
In Windows 10, click on the Network icon in the system tray to open the list of available WiFi networks.
3
Locate the WiFi network of the NR2301. Then click Connect.
4
Chapter 3 Tutorials
A
NR2301 User's Guide
29
B
C