Connecting To External Audio Devices; Ta3 Sh3 Sc3 - Yamaha TransAcoustic TA3 Owner's Manual

Connecting to external audio devices

Output the digital sound of the instrument to an external device
(AUX OUT jacks)
TA3 SH3 SC3
By connecting powered speakers or a stereo system to the AUX OUT [R]/[L/L+R] jacks via an audio cable, you can listen
to the performances (digital sound) played on this instrument through the external speakers. Also, if you connect an
audio recorder such as an IC recorder, you can record performances played on this instrument.
NOTICE
To avoid possible damage, first turn on the power to the instrument, and then to the external device(s). When turning off the
power, first turn off the power to the external device(s), and then to the instrument.
Example:
AUX OUT
[R]/[L/L+R]
Stereo phone plug
(standard)
NOTE
• You can use the [VOLUME] control on this instrument to adjust the output volume from the AUX OUT jacks.
• The acoustic piano sound is not output from the AUX OUT jacks.
• Use only the [L/L+R] jack for connection with a monaural device.
• When you are listening to the digital sound output to the external device via the AUX OUT jacks from headphones connected to this
instrument, we recommend that you set the Binaural function to off. The on/off setting can be changed in Function F4.1 (page 49).
Control unit bottom panel
Audio cable
Audio signal
Powered speakers
Stereo phone plug
(standard)
TA3 SH3 SC3 Owner's Manual
5
57