Preparing The Power Supply - Yamaha TransAcoustic TA3 Owner's Manual

1

Preparing the Power Supply

In order to use the special functions on the TransAcoustic™ Piano or the Silent Piano™, the power to the instrument must
be turned on. If you are using the instrument as a conventional acoustic piano, it is not necessary to turn on the power.
1
Connect the plugs of the AC adaptor and power cord.
The connection method differs depending on the instrument.
WARNING
• Use the specified adaptor (page 76) only. Using the wrong AC adaptor can result in damage to the instrument or
overheating.
• When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn the power off and disconnect the plug from the outlet.
NOTE
When disconnecting the power cord/AC adaptor, first turn off the power, and then follow this procedure in reverse order.
• For upright pianos:
TA3 SH3
Connect the plugs to the DC IN jack (DC IN 24V or DC IN 16V) located at the rear of the piano, and to the AC
outlet in the order shown in the illustration. Use the provided hooks to hold and organize any excess cord.
* Depending on the specific model, the connection method may differ.
The shape of the plug and outlet may differ depending on your locale.
14
TA3 SH3 SC3 Owner's Manual
SC3
Hook
AC outlet
1-3
Power cord
AC
adaptor
AC plug
1-1
1-2
DC IN jack
(DC IN 24V or
DC IN 16V)