Advertisement
Problem
Possible
Solution
,, No power
,, Check
if you pressed
TV POWER
on tile remote control unit, (See page
14,)
If the indicator
on the TV does not light/Jp,
press TV POWER
on the remote
control
unit,
,, Is the AC cord disconnected?
(See page 6,)
,, Has the power been turned
on? (See page 14,)
,, Unit cannot
be operated.
,, External
influences
such as lightning,
static
electricity,
may cause
improper
operation,
In this case, operate
the unit after first turning
on the power of the TV
or unplugging
the AC cord and replugging
it in after 1 or 2 minutes.
,, Remote
control
unit
does
not
operate.
,, Picture is cut off/with
sidebar
screen.
,, Strange
color, light color, or color
misalignment
,, Power is suddenly turned off,
,, No picture
,, Is the FUNCTION
set correctly?
Set it to the TV setting
position,
,, Are batteries
inserted
with polarity
( k,
) aligned?
(See page
7,)
,, Are batteries
worn out? (Replace
with new batteries.)
,, Are you using it under strong or fluorescent
lighting?
,, Is a fluorescent
light illuminated
near the remote control
sensor?
,, Is the image position
correct?
(See page 33.)
,, Are screen mode adjustments
such as picture
size made correctly?
(See pages
37 and 38)
,, Adjust
the picture tone. (See pages
22 to 24,)
,, Is the room too bright?
The picture
may look dark in a room that is too bright,
,, Check the input signal setth/g,
(See page 39.)
,, Is the sleep timer set? (See page 40.)
,, Check the power control settings, (See page 26.)
,, The unit's internal temperature has increased,
Remove any objects blocking vent or clean,
,, Is connection
to other components
correct?
(See
pages
28 to 32.)
,, Is correct
input signal source
selected
after connection?
(See page 35,)
,, Is the correct
input selected?
(See page 35.)
,, Is a non-compatible
signal
being input? (See page 56,)
,, Is picture
adjustment
correct?
(See pages 22 to 24.)
,, Is "On" selected
in "Audio
Only"? (See page 39.)
,, No sound
o Is the volume too low? (See page 17.)
,, Is "Variable" selected in "Output Select"? (See page 40.)
Cautions
regarding
use in high and Jow temperature
environments
When the unit is used
in a low temperature
space
(e.g, room, office),
the picture
may leave trails or appear
slightly
delayed,
This is not a malfunction,
and the unit will recover
when the temperature
returns to normak
,_ Do not leave the unit in a hot or cold location.
Also, do not leave the unit in a location
exposed
to direct sunJight or near
a heater, as this may cause the cabinet
to deform and the Liquid Crystal
panel to malfunction,
Storage
temperature:
4°F to +140°F ( 20°C to +60°C)
Q
-55
Advertisement
