Advertisement
Usefum adjustment
settings
DVminput signam setting
Press mNPUTto select INPUT5.
Press MENU and the MENU screen displays,
- VOL +
_ C_4 /',
_
•
POWEr{
mNPUT button
Selecting
input source
Use this menu to select the input source,
Press iNPUT,
,_ A list of selectable sources appears,
Press iNPUT
again to select
the input source,
An
image
from
the
selected
source
automatically
displays,
,_ You can
also
select
the
input
source
by
pressing
A/I¥.
If the corresponding
input
is not plugged
in,
you
cannot
change
the
input.
Be sure
to
connect
the equipment
beforehand,
input
signal
type
For setting
the signal
type of external
equipment
connected
to INPUT 1, 2 or 5 terminals,
Press 4/1_ to select "Option".
Press ,A/?' to select "Input Select", and then
press ENTER,
Press
,A/T
to select
the
equipment
connected
to INPUT 5 terminal,
and then
press ENTER,
Press MENU and the MENU screen displays,
Press _1/1_ to select "Option",
Press ,A/T to select "Input Select", and then
press ENTER,
Press ,A/T to select a signal type you want
to set, and then press ENTER
,, If the selected signal type is incorrect, an image
does not display or no color image displays.
,, If you set INPUT1 and INPUT2 to Auto, the TV will
automatically
select the input signal.
,, Check
tile operation
manual
of the external
equipment
for the signal type.
,, Setting
INPUT 1 and INPUT 2 signal selection
to "Auto"
when other equipment
is connected
will result in the
following
connectivity
priority.
Q
-35
Advertisement
