Advertisement
Useful adjustment
settings
For adjusting
a picture's
horizontal
and vertical
position,
Press MENU and the MENU screen displays,
Press 4/11_ to select "Setup".
Press
,A/V
to select
"Position",
and then
press ENTER,
Press _,/V
to select "H-Pos," or "V-Pos,',
Press _/_
to adjust the item to your desired
position,
You can move the picture around on the screen,
Press A/T/4/_
to move an image on the screen to
the desired
position,
Press ENTER
to return to the
original
image position,
. While
pressing
A/_f/_/_,
an on-screen
image,
"Adjusting
Position"
displays
to the desired
position.
. This setting
cannot be stored.
Once the TV shuts down or
enters
standby
mode, the setting
is erased,
To move the
picture
around
the screen
again,
you must perform
the
above
procedure
again.
,, The image
position
setting
using the steps on this page
can be stored. Select either according
to your objectives.
. "TV",
"INPUT1",
"INPUT2",
'qNPUT3",
"INPUT4"
and
"INPUT5"
can each adjust the image
position
setting
on
this page. The same for view modes.
. An on-screen
image from PC cannot
be moved
around,
. Even when the image fills the screen,
its position
can be
adjusted
with this function.
. Press ENTER to reset the image to original
positions,
,, For resetting
all adjustment
items to the factory
preset
values,
press
A/T
to select
"Reset",
and then
press
ENTER.
,, Adjustments
are stored
separatemy
according
to input
source.
, You can easily move the image position
as shown on this
page,
but when the power
is switched
off the image will
return to the previously
memorized
position.
H-Pos.
V-Pos.
Centers
the image
by moving
it to the left
or right,
Centers the image by moving it up or
down
Q
-33
Advertisement
