Download Print this page

Sharp LC-26GA5U Operation Manual page 26

Liquid crystal television

Advertisement

Basic
adjustment
settings
Power control setting allows you to save energy.
No signal
off
When set to "Enable", the power will automatically
shut
down if no signal inputs for 15 minutes.
Power control setting allows you to save energy,
Power management
When set, the power will automatically
shut down,
Repeat steps 1 and 2 in No signal
off,
Press MENU and the MENU screen displays,
Press _/1_ to select "Power Control".
Press _/_F to select "No Signal Off", and
then press ENTER,
Press _/_
to select "Enable", and then
press ENTER
o Five minutes
before
the power
shuts
down,
remaining
time displays
every minute.
Press A/V
to select "Power Management",
and then press ENTER
Press A/T
to select "Model"
or "Mode2",
and then press ENTER,
, "Disable"
is factory
preset value.
, When a TV program fir/ishes, this function
may not operate,
No operation
off
When set to "Enable", the power will automatically
shut
down if there is no operation
for 3 hours.
Repeat steps 1 and 2 in No signal
off,
Press _k/Y to select "No Operation
Off", and
then press ENTER
Press
_/_
to select
"Enable",
and then
press ENTER.
,, Five minutes before the power shuts down,
remaining time displays every minute.
Off
Model
Mode2
,, No power management
,, Factory preset value
,, If no signal
inputs
for 8 minutes,
the power
shuts down
,, Even if you start using the PC and the signal
inputs
again,
the TV stays off
,, The TV turns
on
again
by pressing
TV
POWER
on the
remote
control
unit,
(See
page
14)
,, If no signal
inputs
for 8 seconds,
the TV
enters
standby
mode,
,, When you start using the PC and the signal
inputs
again,
the TV turns
on
,_ When
using a digital
PC and setting
"Mode2"
in Power
management,
the
power
may
not
turn
back
on
automatically
even if the signal
inputs again.
,_ If you turn off the power by disconnecting
AC cord when
setting
"Mode2"
in power management,
the Is,/may
not
function
properly
aRer turning the power on again. In such
case, press TV POWER
on the remote control
unit,
, "Disable" is factory preset value.
(_
-26

Advertisement

loading

This manual is also suitable for:

Lc-32ga5u