Adjusting The Cutting Height - Toro TurfMaster 22235 Operator's Manual

Adjusting the Cutting Height

WARNING
Adjusting the cutting-height levers could bring your hands into contact with a moving blade
and result in serious injury.
• Shut off the engine and wait for all moving parts to stop before adjusting the cutting height.
• Do not put your fingers under the housing when adjusting the cutting height.
The cutting height is controlled with a front lever and a rear lever, both on the left side of the machine. To raise
or lower the machine, engage the lever, raise or lower the machine, and then disengage the lever.
Figure 13
13
g232160