6.18 Electric Connection - Cadel SOUND3 5 UP Installer Manual

Fig. 51 - Remove casing
• Feed the flexible hose through the hole below the tank (see Fig. 54) and through the previously opened hole of the casing
(see Fig. 55).
• Fit the casing back on the stove (see Fig. 56). The hose is now ready to be connected to an outside wall.
Fig. 54 - Feeding flexible hose 1

6.18 ELECTRIC CONNECTION

Warning: the appliance must be installed by an authorized technician!
• The electric connection occurs through a cable with plug put in an electric socket which is able to support charge and tension
specific of every model, as described in the technical datas table (see FEATURES a pag. 32).
• The plug must be easily accessible when the appliance is installed.
• Please further assure you that your network is endowed with an efficient earth connection: if it does not exist or if it is not
efficient, please endow you with one in compliance with the law.
• Connect the supply cable first on the back of the stove (see Fig. 57 and ) and then at a wall electric socket.
Fig. 57 - Electric socket with master switch
Stufe a pellet
Fig. 52 - Break ring
Fig. 55 - Feeding flexible hose 2
Fig. 53 - Remove flexible hose
Fig. 56 - Decoupled air hose
Fig. 58 - Plug connected
23