Multiclient Integrated Kvm - Philips EVNIA 279M1RV User Manual

2.4 MultiClient Integrated KVM

What is it?
1
With MultiClient Integrated KVM switch,
you can control two separate PCs with
one monitor-keyboard-mouse set up.
How to enable MultiClient Integrated
2
KVM?
With the built-in MultiClient Integrated
KVM, Philips monitor allows to quickly
switch your peripherals back and forth
between in two devices through the OSD
menu setting.
Please follow the steps for the settings.
1. Connect the USB upstream cables
from your dual devices to the "USB
C1" and "USB up" port of this monitor
at the same time.
2. Connect peripherals to the USB
downstream port of this monitor.
PC1
USB C
1 2
PC2
USB USB
3. Enter to OSD menu. Go to KVM layer
and select "Auto", "USB C" or "USB up"
to switch the control of peripherals
from one device to another. Simply
repeat this step for switching the
control system using one set of
peripheral.
KVM Auto:
Source
HDMI/DP
USB C
 

Note
You can also adopt "MultiClient
Integrated KVM" in PBP mode, when you
enable PBP, you can see two different
sources projected to this monitor side
by side simultaneously. "MultiClient
Integrated KVM" enhances your
operation by using one set of peripherals
to control between in two systems
through the OSD menu setting. Follow
step3 as mentioned above.
12
USB Hub
USB UP
USB C
  
    
  