• Please use approved power cord provided by Philips all the time. If your power cord is missing, please 1.1 Safety precautions and contact with your local service maintenance center.
Page 4
1. Important take shorter breaks more often at such as, alcohol, or ammonia-based your workstation than longer breaks liquids to clean your monitor. and less often; for example a 5-10 • To avoid the risk of shock or minute break after 50-60-minute permanent damage to the set, do continuous screen use is likely to not expose the monitor to dust,...
1. Important gradually over a period of time after 1.2 Notational Descriptions the power has been switched off. The following subsections describe Warning notational conventions used in this Failure to activate a screen saver, or document. a periodic screen refresh application may result in severe “burn-in”...
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back...
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Page 8
USB C driver. You can find the “LAN Drivers” from CD USB C disk if bundled or go to Philips website USB Type-A support page to download the driver. 279P1 Please follow the steps for the installation: 1.
Page 9
ON at all times to be able to follow Window’s instructions to use this function. proceed with installation. Some select Philips displays may not 3. It will show “success” when the Power or Charge your device when installation is finished.
What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Page 11
2. Setting up the monitor Resolution notification Note This monitor is designed for optimal If this display has "DPS" for ECO design, performance at its native resolution, the default setting is "ON" mode: it 3840 x 2160. When the monitor is makes the screen looks slightly dim;...
Page 12
2. Setting up the monitor Physical Function Height adjustment Tilt 35° -5° 150mm Pivot Swivel +180° -180° 0° 0° -90° 90°...
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation.
experience. How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, SmartImage dynamically enhances the • EasyRead: Helps improve reading...
Page 15
LCD monitors. general office applications. Typical uniformity is measured around 75-80%. By enabling Philips • Photo: This profile combines color SmartUniformity feature, display saturation, dynamic contrast and uniformity is incr eased to above sharpness enhancement to display 95%.
3. Image Optimization • HDR Photo: Enhancing red, green, 3.2 SmartContrast and blue for true-to-life visuals. What is it? • Personal: Customize available settings in picture menu. Unique technology that dynamically analyzes displayed content and • Off: No optimization by SmartImage automatically optimizes a Monitor's HDR.
3. Image Optimization 3.3 HDR(279P1LR) HDR Settings in Windows10 system. Steps 1. Right click on the desktop, enter to Display settings. 2. Select the display/monitor. STEP 5 3. Adjust resolution to 3840 x 2160 4. Turn the “HDR and WCG” to on mode.
4.LightSensor 4. LightSensor What is it? Light Sensor is a unique and intelligent way of optimizing picture quality by measuring and analyzing the incoming signal to automatically adjust picture quality settings. Light Sensor uses a sensor to adjust the picture brightness depending on the room light conditions.
5. PowerSensor™ detection signal for distances up to 5. PowerSensor™ 120 cm or 47 inches. (Setting 4) • Since some dark colored clothing How does it work? tends to absorb infrared signals even when the user is within 100 cm • PowerSensor works on principle or 40 inches of the display, step up of transmission and reception of...
Page 20
5. PowerSensor™ Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection .
3. Ideal working posture syndrome (CVS) • Reposition your screen to Philips monitor is designed to prevent appropriate height and angle eye strain caused by prolonged according to your height. computer use. 4. Choose Philips monitor for easy-on- Follow below instructions and use eyes.
7.Technical Specifications 7. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W - LED Panel Size 27" W (68.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.1554 (H) mm x 0.1554 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 3840 x 2160 @ 60 Hz Viewing Angle 178°...
Page 23
7.Technical Specifications Convenience Built-in speaker 3 W x 2 User Convenience English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brazil Portuguese, OSD Languages Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean Other Convenience VESA mount (100 x 100 mm), Kensington Lock Plug &...
Page 24
100% PVC BFR free housing Cabinet Color Black Finish Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box.
8.Power Management 8. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced...
Page 28
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
Page 29
9.Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
"burn-in", also Service contact information listed in known as "after-imaging" or "ghost Important information manual and imaging", on your screen. "Burn-in", contact Philips customer service "after-imaging", or "ghost imaging" representative. is a well-known phenomenon in * Functionality different according to LCD panel technology.
Page 33
This may • Shut down your computer, affect your warranty conditions. disconnect your old monitor and reconnect your Philips LCD monitor. How should I clean the LCD • Turn on your monitor and then turn surface? on your PC.
Page 34
“ghost image” symptoms any PC, workstation or Mac? that will not disappear and cannot be repaired. The damage mentioned above Ans.: Yes. All Philips LCD monitors are is not covered under your warranty. fully compatible with standard PCs, Macs and workstations.
Page 35
10.Troubleshooting & FAQs Q13: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
Page 36
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.