Setting Up The Monitor; Installation - Philips EVNIA 279M1RV User Manual

2. Setting up the monitor

2.1 Installation

Package contents
1
* DP
*USB C-C
*Different according to region
Note
Use only AC/DC adapter model: FSP230-
AJAN3-T/ ADP-230JB DH.
Quick start
279M1RV
Register your product and get support at www.philips.com/welcome
AC/DC Adapter
* HDMI
* USB A-B
Install the base
2
1. In order to well protect this monitor
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of the
base.
(3) Use a screwdriver to tighten the
screw located at the bottom of the
base, and secure the base to the
stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
3. After attaching the base, erect
the monitor with both hands on
holding the monitor together with
styrofoam firmly. Now you can pull
out the styrofoam. When you pull
out the styrofoam, do not squeeze
the panel to avoid broken panel.
5