Related Manuals for Philips Momentum 279M1
Summary of Contents for Philips Momentum 279M1
- Page 1 Momentum 279M1 www.philips.com/welcome EN User manual Customer care and warranty 29 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
Power .......... 22 6. Technical Specifications ..23 6.1 Resolution & Preset Modes ...26 7. Power Management ....28 8. Customer care and warranty . 29 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy ....29 8.2 Customer Care & Warranty ..32... -
Page 3: Important
DC power cord for normal operation. • Please use approved power cord 1.1 Safety precautions and provided by Philips all the time. If maintenance your power cord is missing, please contact with your local service Warnings center. - Page 4 1. Important • To avoid potential damage, for panel. When moving your monitor, example the panel peeling from the grasp the frame to lift; do not lift bezel, ensure that the monitor does the monitor by placing your hand or not tilt downward by more than -5 fingers on the LCD panel.
-
Page 5: Notational Descriptions
1. Important Ghost image Note Consult a service technician if the • Always activate a moving screen monitor does not operate normally, or saver program when you leave you are not sure what procedure to take your monitor unattended. Always when the operating instructions given in activate a periodic screen refresh this manual have been followed. -
Page 6: Disposal Of Product And Packing
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
278E9 Quick Start 2. Hold the stand with both hands. Register your product and get support at www.philips.com/welcome (1) Gently attach the base to the stand. (2) Use your fingers to tighten the screw located at the bottom of the base. - Page 8 2. Setting up the monitor Connecting to your PC USB downstream USB downstream/USB fast charger USB downstream Kensington anti-theft lock 2 3 4 5 6 7 8 9 10 11 12 Fast Charger Connect to PC 1. Connect the power cord to the back of the monitor firmly.
-
Page 9: Operating The Monitor
2. Setting up the monitor Some select Philips displays may not 2.2 Operating the monitor Power or Charge your device when it enters to “Sleep/Standby” mode (Red Description of the control buttons power LED breathing). In that case, please enter to OSD Menu and select “USB Standby Mode”, then, turn the... - Page 10 What is it? On-Screen Display (OSD) is a feature in HDMI is a single cable to carry both all Philips LCD monitors. It allows an end picture and audio signals from your user to adjust screen performance or devices to your monitor, saving you from select functions of the monitors directly cable clutter.
- Page 11 Speed Low, Normal, High Brightness Bright, Brighter, Brightest remote control. Adaptive Sync Game Setting Crosshair 2. This Philips monitor is certified Low Input Lag with NVIDIA® G-SYNC® compatible. SmartResponse SmartFrame The technology is used to match Size (1,2,3,4,5,6,7) Brightness (0~100)
- Page 12 2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 3840 × 2160. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 3840 ×...
-
Page 13: Remove The Base Assembly For
2. Setting up the monitor Note 2.3 Remove the Base Assembly for VESA Mounting This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation. -
Page 14: Multiclient Integrated Kvm
KVM Auto: KVM? Source USB Hub With the built-in MultiClient Integrated HDMI/DP USB UP KVM, Philips monitor allows to quickly switch your peripherals back and forth USB C USB C between in two devices through the OSD menu setting. ... -
Page 15: Multiview
3. Toggle to the up or down to select Why do I need it? [PBP Mode], then toggle to the right. With the ultra high resolution Philips 4. Toggle to the up or down to select MultiView display, you can experience... - Page 16 2. Setting up the monitor MultiView in OSD menu [PBP]: Picture by Picture Open up a sub-window side-by-side of another (main) signal source. When the sub source is not detected: (main) Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode.
-
Page 17: Image Optimization
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, SmartImage dynamically enhances the • Xbox: Level up your Xbox... - Page 18 Xbox ex- time. Developed for wellbeing, perience. Philips LowBlue Mode setting uses • Other Ambiglow modes: More a smart software technology to Ambiglow modes are available reduce harmful shortwave blue for use for a customized experi- light.
-
Page 19: Smartcontrast
3. Image Optimization Functionality: Optimizes display Note settings for Xbox, connects the To switch off HDR function, please remote control to the console, and disable from Input device and its enables Ambiglow. content. • Optimal Picture Performance: Inconsistent HDR settings between Optimizes display image qual- input device and monitor may cause ity and response time for Xbox... -
Page 20: Hdr Settings In Windows 10 System
3. Image Optimization 3.3 HDR Settings in Windows 10 system Steps 1. Right click on the desktop, enter to display settings. 2. Select the display/monitor. STEP 5 3. Adjust resolution to 3840 x 2160. 4. Turn the “HDR and WCG” to on mode. -
Page 21: Adaptive Sync
3. Image Optimization • AMD Radeon R9 285 3.4 Adaptive Sync • AMD Radeon R7 260X • AMD Radeon R7 260 ■ Processor A-Series Desktop and Adaptive Sync Mobility APUs • AMD A10-7890K PC gaming has long been an imperfect •... -
Page 22: Nvidia® G-Sync® Compatible
• For best output performance, please always ensure that your graphic card is capable of achieving the maximum resolution and refresh rate of this Philips display. • NVIDIA® G-SYNC® support interface: DisplayPort. • Make sure your graphic card supports NVIDIA® G-SYNC®. -
Page 23: Ambiglow
[Color Shift], [Color Wave], [Color image. Whether you are playing games, Breathing], [Starry Night], [Static or watching movies, Philips Ambiglow Mode], [Your Color], [Light Position], offers you a unique and immersive [Speed], [Brightness], [Off]. -
Page 24: Power Delivery And Smart Power
5. Power Delivery and Smart Power 5. Power Delivery and Smart Power Smart Power is an exclusive Philips technology that provides flexible power delivery options. With Smart Power, you can still charge your device without sacrificing the screen brightness, even set your screen as VESA DisplayHDR 600. -
Page 25: Technical Specifications
6.Technical Specifications 6. Technical Specifications Picture/Display Monitor Panel Type Nano IPS Techonology Backlight W-LED system Panel Size 27" W (68.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.1554(H) mm x 0.1554(V) mm Contrast Ratio (typ.) 1,000:1 Recommended Resolution 3840x2160 @ 60 Hz Viewing Angle 178°... - Page 26 6.Technical Specifications English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brazil Portuguese, OSD Languages Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean Other Convenience VESA mount(100×100mm), Kensington Lock Plug & Play Compatibility DDC/CI, sRGB, Windows 10/8.1/8/7, Mac OSX Stand Tilt -5 / +20 degree...
- Page 27 Finish Glossy/Textured Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box. 3. The version of HDMI and DisplayPort comply with the Compliance Test...
-
Page 28: Resolution & Preset Modes
79.98 1280 x 1024 75.03 graphic card is capable of achieving 67.50 1920 x 1080 60.00 the maximum resolution and refresh rate of this Philips display. 135.00 1920 x 1080 120.00 2. The default resolution through HDMI 133.29 1920x2160 59.98... - Page 29 6.Technical Specifications 3. If you feel the texts in your display is a little fade away, you can adjust your fonts setting in your PC/ Notebook as following steps. Step 1: Control panel/All Control Panel Items/Fonts Step 2: Adjust Clear Type Text Step 3: Uncheck "Clear Type"...
-
Page 30: Power Management
7.Power Management 7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 31: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 32 Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel).
- Page 33 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
-
Page 34: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 35: Troubleshooting & Faqs
• Disconnect the monitor from mains This page deals with problems that can power source immediately for safety be corrected by a user. If the problem • Contact with Philips customer still persists after you have tried these service representative immediately. solutions, contact Philips customer service representative. -
Page 36: General Faqs
Service contact information listed • Shut down your computer, in Regulation & Service Information disconnect your old monitor and Manual and contact Philips customer reconnect your Philips monitor. service representative. • Turn on your monitor and then turn * Functionality different according to on your PC. - Page 37 Can I connect my monitor to any please use isopropyl alcohol. Do PC, workstation or Mac? not use other solvents such as Ans.: Yes. All Philips monitors are fully ethyl alcohol, ethanol, acetone, compatible with standard PCs, hexane, etc. Macs and workstations. You may...
- Page 38 Regulation & Service Information a periodic screen refresh application Manual can be download on the may result in severe “burn-in” or “after- Philips website support page. image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.
-
Page 39: Multiview Faqs
9.Troubleshooting & FAQs 9.3 Multiview FAQs How to listen to Audio, independent of video? Ans.: Normally the audio source is linked to the main picture source. If you want to change audio- source input , you can press to enter OSD menu. Select your preferred [Audio Source] option from the [Audio] main menu. - Page 40 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.