• Please use approved power cord 1.1 Safety precautions and main- provided by Philips all the time. If your power cord is missing, please contact tenance with your local service center. (Please...
not tilt downward by more than -5 • Oil-based cleaning solutions may degrees. If the -5 degree downward damage the plastic parts and void the tilt angle maximum is exceeded, the warranty. monitor damage will not be covered • Unplug the monitor if you are not under warranty.
1.2 Notational Descriptions of still or static images over an extended period may cause “burn The following subsections describe in”, also known as “after-imaging” or notational conventions used in this “ghost imaging”, on your screen. document. • “Burn-in”, “after-imaging”, or “ghost imaging”...
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily This marking on the product or on entails participation in national take- its packaging illustrates that, under...
Package contents installation. Quick start 279M1RV Register your product and get support at www.philips.com/welcome 2. Hold the stand with both hands. (1) Gently attach the base to the stand. (2) Use your fingers to tighten the screw located at the bottom of the base.
Page 8
HDD, for example. The display must be powered ON at all times to be able to USB C use this function. USB UP Some select Philips displays may not USB downstream/USB fast charger Power or Charge your device when it USB downstream...
2.2 Operating the monitor enters to “Sleep/Standby” mode (Red power LED breathing). In that case, Description of the control buttons please enter to OSD Menu and select “USB Standby Mode”, then, turn the function to “ON” mode (default=OFF). This will then keep the USB power and charging functions active even when the monitor is in sleep/standby mode.
Page 10
What is it? On-Screen Display (OSD) is a feature in all HDMI is a single cable to carry both Philips LCD monitors. It allows an end user picture and audio signals from your to adjust screen performance or select devices to your monitor, saving you from functions of the monitors directly through cable clutter.
Page 11
All-around, Top-Left-Right, Left-Right, Bottom Speed Low, Normal, High remote control. Brightness Bright, Brighter, Brightest Adaptive Sync Game Setting 2. This Philips monitor is certified with Crosshair Low Input Lag AMD FreeSync™ Premium/NVIDIA® SmartResponse SmartFrame G-SYNC® compatible. The technology Size (1,2,3,4,5,6,7)
Page 12
Height adjustment Resolution notification This monitor is designed for optimal performance at its native resolution, 3840 × 2160. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 3840 × 2160 for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2.3 Remove the Base Assembly Note for VESA Mounting This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation.
How to enable MultiClient Integrated KVM Auto: KVM? Source USB Hub With the built-in MultiClient Integrated KVM, Philips monitor allows to quickly HDMI/DP USB UP switch your peripherals back and forth USB C USB C between in two devices through the OSD menu setting.
Why do I need it? 3. Toggle to the up or down to select With the ultra high resolution Philips [PBP Mode], then toggle to the right. MultiView display, you can experience a 4. Toggle to the up or down to select...
Page 16
MultiView in OSD menu [PBP]: Picture by Picture Open up a sub-window side-by-side of another (main) signal source. When the sub source is not detected: (main) Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode.
FPS, Racing, RTS, Gamer 1, Gamer in real time. Whether you're working 2, Movie, Economy, LowBlue Mode, with text applications, displaying images SmartUniformity, and Off. or watching a video, Philips SmartImage delivers great optimized monitor performance. Why do I need it? ...
Page 18
LCD displays. ence. Typical uniformity is measured • FPS: For playing FPS (First Person around 75-80%. By enabling Philips Shooters) games. Improves dark SmartUniformity feature, display theme black level details. uniformity is increased to above • Racing: For playing Racing games.
• Optimal Picture Performance: Note Optimizes display image qual- To switch off HDR function, please disable ity and response time for Xbox from Input device and its content. consoles. Inconsistent HDR settings between • Convenient CEC Control: Con- input device and monitor may cause sumer Electronics Control (CEC) unsatisfying images.
3.3 HDR Settings in Windows 10 system Steps 1. Right click on the desktop, enter to display settings. 2. Select the display/monitor. 3. Adjust resolution to 3840 x 2160. STEP 5 4. Turn the “HDR and WCG” to on mode. 5.
3.4 AMD FreeSync™ Premium Pro AMD Radeon R9 285 • AMD Radeon R7 260X • AMD Radeon R7 260 • ■ Processor A-Series Desktop and Mobility APUs AMD A10-7890K • PC gaming has long been an imperfect AMD A10-7870K • experience because GPUs and monitors update at different rates.
Note • For best output performance, please always ensure that your graphic card is capable of achieving the maximum resolution and refresh rate of this Philips display. • NVIDIA® G-SYNC® support interface: DisplayPort. • Make sure your graphic card supports NVIDIA® G-SYNC®.
[Color Shift], [Color Wave], [Color Whether you are playing games, or Breathing], [Starry Night], [Static watching movies, Philips Ambiglow offers Mode], [Your Color], [Light Position], you a unique and immersive viewing [Speed], [Brightness], [Off].
5. Power Delivery and Smart Power Smart Power is an exclusive Philips technology that provides flexible power delivery options. With Smart Power, you can still charge your device without sacrificing the screen brightness, even set your screen as VESA DisplayHDR 600.
Page 25
6. Technical Specifications Picture/Display Monitor Panel Type Nano IPS Techonology Backlight W-LED system Panel Size 27" W (68.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.1554(H) mm x 0.1554(V) mm Contrast Ratio (typ.) 1,000:1 Recommended Resolution 3840x2160 @ 60 Hz Viewing Angle 178°...
English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brazil Portuguese, Polish, OSD Languages Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean Other Convenience VESA mount(100×100mm), Kensington Lock Plug & Play Compatibility DDC/CI, sRGB, Windows 10/8.1/8, Mac OSX Stand Tilt -5 / +20 degree Swivel -35 / +35 degree...
Page 27
Finish Glossy/Textured Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box. 3. The version of HDMI and DisplayPort comply with the Compliance Test Specification...
79.98 1280 x 1024 75.03 graphic card is capable of achieving 67.50 1920 x 1080 60.00 the maximum resolution and refresh rate of this Philips display. 135.00 1920 x 1080 120.00 2. The default resolution through HDMI 133.29 1920x2160 59.98...
Page 29
3. If you feel the texts in your display is a little fade away, you can adjust your fonts setting in your PC/Notebook as following steps. Step 1: Control panel/All Control Panel Items/Fonts Step 2: Adjust Clear Type Text Step 3: Uncheck "Clear Type"...
7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Pixel Defect Policy pixels of other colors. Philips strives to deliver the highest Types of Pixel Defects quality products. We use some of the Pixel and sub pixel defects appear on the industry's most advanced manufacturing screen in different ways.
Page 32
Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel).
Page 33
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Do not perform any troubleshooting steps • Disconnect the monitor from mains power source immediately for safety 9.1 Troubleshooting • Contact with Philips customer service This page deals with problems that can representative immediately. be corrected by a user. If the problem Imaging Problems...
• Restart your computer and repeat step contact information listed in Important 2 and 3 to verify that your PC is set at information manual and contact Philips 3840 × 2160. customer service representative. • Shut down your computer, disconnect...
Page 37
For normal cleaning, use a clean, PC, workstation or Mac? soft cloth. For extensive cleaning, Ans.: Yes. All Philips monitors are fully please use isopropyl alcohol. Do compatible with standard PCs, not use other solvents such as ethyl Macs and workstations. You may...
Page 38
EDFU? or “ghost image” symptoms that will not Ans.: Important Information manual disappear and cannot be repaired. The can be download on the Philips damage mentioned above is not covered website support page. under your warranty. Q11: Why is my Display not showing...
9.3 Multiview FAQs How to listen to Audio, independent of video? Ans.: Normally the audio source is linked to the main picture source. If you want to change audio-source input , you can press to enter OSD menu. Select your preferred [Audio Source] option from the [Audio] main menu.
Page 40
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.