Multiclient Integrated Kvm - Philips Evnia 49M2C8900 Series User Manual

2.4 MultiClient Integrated KVM

What is it?
1
With MultiClient Integrated KVM switch,
you can control two separate PCs with
one monitor-keyboard-mouse set up.
How to enable MultiClient Integrated
2
KVM
With the built-in MultiClient Integrated
KVM, Philips monitor allows to quickly
switch your peripherals back and forth
between in two devices through the OSD
menu setting.
Use USB-C and HDMI or DP as input,
then use USB-C/USB-B as USB upstream.
Please follow the steps for the settings.
1. Connect the USB upstream cable
from your dual devices to the "USB
C" and "USB UP" port of this monitor
at the same time.
Source
HDMI/DP
USB C
2. Connect peripherals to the USB
downstream port of this monitor.
1
OR OR
HDMI 1 HDMI 2
PC1
USB UP
USB Upstream
USB UP
USB C
USBC
PC2
USB USB
2
3. Enter to OSD menu. Go to KVM
layer and select "Auto", "USB C"
or "USB Up" to switch the control
of peripherals from one device to
another. Simply repeat this step for
switching the control system using
one set of peripheral.
SmartImage Game Mode
HDMI Refresh Rate
OSD Setting
PIP/ PBP
Smart Size
USB Setting
Smart Power
Over Scan
Resolution
5120X1440
Use DP and HDMI as input then use
USB-B/USB-C as USB upstream.
Please follow the steps for the settings.
1. Connect the USB upstream cable
from your dual devices to the "USB
C" and "USB UP" port of this monitor
at the same time.
PC1: USB UP as upstream and HDMI or DP
cable for both video and audio transfer.
PC2: USB-C as upstream (USB C-A) and DP
or HDMI for both video and audio transfer.
1
HDMI or DP
DP or HDMI
2. Connect peripherals to the USB
downstream port of this monitor.
1
OR
OR
HDMI 1 HDMI 2
PC1
USB UP
16
ambiglow
Ambiglow Input Audio
USB-C Setting High Resolution
Off
USB Standby Mode
Auto
KVM
Refresh Rate Input Source Adaptive Sync
240Hz HDMI 1 On
Source USB Upstream
2
USB USB
System Setup Close
Auto
USB C
USB Up Select
OK
Back
SmartImage
Standard
USB UP
USB C
1
OR OR
HDMI 1 HDMI 2
USBC
PC2