Pioneer CLD-2090 Operating Instructions Manual page 32

1 Press PGM.
3.0.12 APLAY
Total Time Program
8 0.00
.! Step- 1
Pane oie ae ed
Display with a disc containing a TOC
2 Select the desired chapters or tracks.
Ca jle |= Cadiz] Cad oO] le |
Program
Sten. 4
Programmed chapters
If you make a mistake during entry:
Press CLEAR and enter the correct number with the digit buttons.
Hs BIG)
Yo
foo a
Screen display after prograraming is completed
306,32
Total Time
3 2.
PLAY
Program
Step- 4
Number of programmed tracks
and total play time
Programmed track numbers
3 Press PLAY >.
PLAY Search
Track 9
To stop program play in the middle:
@ Press CLEAR on the remote control unit.
To clear the program contents:
@ Open the disc table,
@ Press CLEAR on the remote control unit in stop mode.
Programming a pause:
out recording,
32
<VRB1046>
To program a pause:
In step 2 of the above procedure, press PAUSE
i instead of
entering a chapter or tack number.
NOTE:
Programmed pause indication:
On the monitor screen — 8
in the front panel display window — PA