Advertisement
Quick Links
Operating
Instructions
as £
DIGITAL AUDIO
LASER
DISC
@ This player does not apply to business use, and CD-
ROM/CD graphic discs cannot be played with this player.
CD CDV LD PLAYER
The function of both units, CLD-2090 and CLD-2290
are identical.
§ seasttieer
[Nisc]
Thank you for buying this Pioneer product.
the explanatory
drawings.
However,
the method
of
connecting and operating the unit is the same.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO
NOT
EXPOSE
THIS APPLIANCE
TO
RAIN
OR
MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
{For Canadian model]
CAUTION:
To PREVENT ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this switch.
U.S., Canadian, European, U.K, and Australian models
are not provided with this switch.
The line voltage selector switch is located on the rear panel
of this player. Before your player is shipped from the factory,
the switch is set to the power requirements of the player's
destination. Check that it is set properly before plugging
the power cord into the outlet. if the voltage is not properly
set or if you move to an area where the voltage requirements
differ, adjust the selector switch as follows
Use a medium-sized (flat blade) screwdriver.
Insert the tip
of the screwdriver into the groove of the selector switch
and turn it to set the player to the power voltage of your
area.
Set the selector so that arrow
points power voitage of your
area (Figure shows
arrow
pointing to 220 - 240 volts.)
© PIONEER'
The Art of Entertainment
Advertisement
