Advertisement
CD/CDV (Audio part)
Direct CD
more pure sound can be reproduced.
1 Press DIRECT CD on the front panel.
J
2 Open the disc tabie.
EJECT
OPEN/CLOSE
OF
xs
[=]
la
Remote control unit
Front panel
;
@ The disc table comes out according to the CD size.
Sf
3 Start play.
PLAY/PAUSE
PLAY
or
ese
>
"4
Remote control unit
J)
Front panel
To exit Direct CD mode:
Press DIRECT CD again. Also, when the video part of CDV is
played, Direct CD mode is canceled automatically.
To play an LD:
Cancel the Direct CD mode. Otherwise, the LD cannot be set
on the disc table.
NOTE
| Peak Level Search
With this function, the peak level of CD or CDV (audio part) can
easily be searched for. This is convenient for adjusting the
proper recording !evel.
To search for the peak level of the entire'disc:
Press PEAK SEARCH on the front panel.
PEAK
SEARCH
iy
The player scans the entire disc and searches for the peak
level. It takes for about 1 minute with 60-minute disc. While
searching, the PEAK indicator is lit on the display.
To search for the peak level of the programmed tracks:
Program the desired tracks beforehand (page 32) and press
PEAK SEARCH.
The player scans all of the programmed
tracks and searches for the peak level between them.
To adjust the recording level
2. Adjust the recording level on the tape deck.
NOTES:
29
<VRB1046>
Advertisement
