Advertisement
COMPONENTS
NAMES AND FUNCTIONS OF REMOTE CONTROL UNIT
A detailed description is provided on the indicated page(s).
Remote control buttons with the same names or marks as buttons on the front panel of the player control the same operations
as the corresponding front panel buttons.
€X button ... p. 22
POWER button
Press to turn the power on and off.
REPEAT A/B buttons ... p. 30
Dae
PGM button ... p. 32 ee
Direct search/Digit buttons am
ey
a Pp. 25
MULTI-SPEED buttons ... p. 28
EJECT button ... p. 20, 22
AUDIO button ... p. 23
DIGITAL/ ANALOG button... p. 23
CLEAR button
Used to clear the repeat mode,
program mode, random play mode
or intro scan mode.
This button is
alse for use in correcting input digits.
SEARCH button ... p. 25, 26
CHP/TM button ... p. 25, 26
SKIP buttons ... p. 25, 33
DISPLAY button ... p. 18, 19
DISC SIDE A/B buttons... p. 20
SCAN control ... p. 24
go cov 10 mavens
When operating the remote control unit, point the unit's
infrared signal transmitter at the remote control receiver
(REMOTE SENSOR) on the front panel of the player. The
remote control unit can be used within a range of about &
meters (16 feet) from the remote sensor, and within angles
of up to about 30 degrees.
NOTE FOR USING THE REMOTE CONTROL UNIT
@
if a plug is connected to the CONTROL IN terminal at the rear
of the player, remote control operations cannot be done with
the remote control unit aimed at the player's remote control
sensor. Aim the remote control unit at the AV control center or
the component display's sensor instead.
STEP button ... p. 28
PLAY button ... p. 21, 22
PAUSE button ... p. 22
If there is any obstacle between the remote control unit and
the player, or if the unit is held at too large an angle relative to
the front panel of the player, the signal from the remote control
unit will fail to reach the remote sensor.
'f the player is operating in the vicinity of other appliances
generating infrared rays, or if other remote control devices using
infrared rays are used near the player, the player may operate
improperly.
Conversely, if the player's remote control unit is
operated in the vicinity of other appliances which use an infrared
remote
control device,
the other appliance
may
operate
improperly. If this should happen, change the place of instaliation
so that improper operation does not occur.
if the range of operation of the remote control unit becomes
too short, replace the batteries.
When the unit is not to be used for a long period of time (more
than one month), remove the batteries to prevent them from
leaking inside the compartment.
[f leakage occurs, wipe up the
liquid inside the compartment and replace the batteries with
new ones.
Do not place books or other objects on the remote contro! unit,
since they might depress the buttons and run down the batteries.
if the remote control sensor window is in a position where it
receives strong light such as sunlight or fluorescent light, controf
may not be possible.
15
<VRB1046>
Advertisement
