Recording - Panasonic PV-L452 Service Manual

Recording

1
3
4
Note:
• Please note that the included 8 MB
Memory Card already contains 12
pre-recorded titles for your use. Please
see page 52 for further details.
• If Memory Card is not inserted, "NO
CARD" appears on-screen.
Set POWER to OFF, then insert the
Memory Card.
• If "CARD ERROR" appears on-screen,
see page 56.
• Sound will not be recorded.
• The features below are not available
while in PHOTO mode.
• Auto Fade • Digital Fade
• Color Digital Filter • Digital Zoom
• Digital E.I.S. • Still/Strobe/Wide
• MotionSensor
• Digital Wipe Mode
• Picture in Picture Wipe Title
Digital Still Camera
Before you begin...
• Connect Camcorder to power source.
• Insert the Memory Card (page 34).
1
Press LCD-OPEN and swing LCD
monitor fully open. Adjust viewing angle.
2
Set POWER to
PHOTO.
• Be sure POWER is
fully rotated to
PHOTO position.
3
Press MENU for
REC MODE menu.
Press UP or DOWN
to select NORMAL
or FINE (page 48).
Then, press
DISPLAY to set.
4
Press RECORD/PAUSE to capture
image.
• As the image is processed, the status
screens below appear.
2
The next image may be captured after
"COMPLETED" disappears.
• Depending on the image taken, the
image page remaining indication may
not change, or it may be decreased by
2 images.
• For sharper images, set electronic
shutter to higher speed when shooting
in bright conditions, such as outdoors.
WARNING:
Do not, under any circumstances, remove
the card immediately after pressing the
RECORD/PAUSE (during recording of an
image) or while deleting. This could
damage the format of the card and make
it unusable.
35