Panasonic PV-L452 Service Manual page 28

Note:
Do not glue the replacement leadless component to the circuit
board.
4.1.12. SPECIAL NOTE
All integrated circuits and many other semiconductor devices are electrostatically sensitive and
therefore require the special handlings techniques described under the "ELECTROSTATICALLY
SENSITIVE (ES) DEVICES" section of this service manual.
4.1.13. IC501 AND IC6001 REPLACEMENT NOTE
IC501 and IC6001 are supplied together only as a Microcontroller Kit (LSUC0005). Microcontroller
Kit consists of IC6001, IC501, and Instruction Sheet.
When replacing either IC6001 or IC501, be sure to replace both IC6001 and IC501. When R6001 is
found on the Main C.B.A., be sure to remove it at the same time.
Otherwise, normal operation may not be possible.
4.1.14. MODEL NO. IDENTIFICATION MARK
Use Marks shown in the chart below to distinguish the different models included in this Service
Manual.
Note:
Refer to Item 3 of Schematic Diagram Notes of Schematic Diagram
Fig. 9
28