30 W.
4. When replacing 0
5. IC306 replacement note:
When replacing this IC, be sure to write the initial data with PC-
EVR Adjustment Program.
6. IC501 and IC6001 replacement note:
IC501 and IC6001 are supplied together only as a Microcontroller
Kit (LSUC0005). Microcontroller Kit consists of IC6001, IC501, and
Instruction Sheet.
When replacing either IC6001 or IC501, be sure to replace both
IC6001 and IC501. When R6001 is found on the Main C.B.A., be
sure to remove it at the same time.
Otherwise, normal operation may not be possible.
11.2. MECHANICAL REPLACEMENT PARTS LIST
MECHANICAL REPLACEMENT PARTS
resistor, a wire can be substituted for it.
89