alcohol and confirm that there is no dust in the TP Clip.
3. To achieve the best adjustment results, warm up the camcorder
for approx. 30 minutes before adjustment.
4. When removing the TP Clip from S301 on the camcorder, be sure
to pinch the grips.
6. Set up the camcorder for adjustment as follows:
Note: (in Method 1)
1. Connect the 46 mm Ring to the Infinity Lens. Then, insert it into
the Light Box.
2. Set the camcorder so that the Decoration Ring of the camcorder is
firmly against the 46 mm Ring.
When performing this operation, ensure that there is no gap
between the Decoration Ring and the 46 mm Ring and that no
external light can enter.
Fig. E1-1
Fig. E1-2
Fig. E1-3
71