Panasonic PV-L452 Service Manual page 70

(adjustment equipment without using Infinity Lens)
24. Lighting (Halogen Lamp (2000 lux))
25. Reflection Chart
Reflection Chart Set (VFKS003-N)
(Reflection Chart Set consists of Gray Scale Chart (VFKS003A),
Color Bar Chart (VFKS003B), Registration Chart (VFKS003C), and
Resolution Chart (VFKS003D)) Gray Scale Chart (VFKS003A) Color
Bar Chart (VFKS003B) Registration Chart (VFKS003C) Resolution
Chart (VFKS003D) Color Chip Chart (VFKW0116)
26. Color Temperature Conversion Filter 80A or equivalent Color
Temperature Conversion Filter
27. Color Compensating Filter CC05M
28. A.W.B. Adjustment Fixture (VFKW0066)
6.3.3. PREPARATION
1. Connect the Interface Box to the TP Board with Camera
Connecting Cable (VFKW1000B).
2. Connect the Interface Box to the Personal Computer with RS-232C
Cable (VFKW1000C or VFKW1000D).
3. Connect the TP Board to S301 on the camcorder. Refer to
TO USE TP BOARD" in "SERVICE NOTES."
4. Connect the AC Adaptor and camcorder, and apply DC +6 V to the
Interface Box.
5. Power on the camcorder.
Note:
In case that the camcorder is in DEMO mode, release DEMO mode
as follows:
Power off the camcorder first. Then, disconnect the TP Board, and
power on the camcorder. Then, press the STOP button over 5
seconds.
CAUTION:
1. Do not connect or disconnect any cables while the camcorder is
powered on.
2. Before using the TP Board, be sure to clean S301 pattern with
70
"HOW