Table of Contents
Advertisement
1
Use the four-way controller (23) to select [AF Setting] in the
[A Rec. Mode] menu.
2
Press the four-way controller (5).
The [AF Setting] screen appears.
3
Use the four-way controller (23) to select [Focusing Area].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to change the autofocus
area.
6
Press the 4 button.
The setting is saved.
The available modes differ depending on the selected shooting mode. Refer
to "Functions Available for Each Shooting Mode" (p.172) for details.
Setting the Auto Macro
When [Auto Macro] is set to O(On), the focus is adjusted to the macro range
(distance to the subject is 10 cm to 60 cm) as necessary, even if the focus mode
is set to = (Standard).
When it is off and the focus mode is set to = (Standard), the AF operates only in
the standard range, and focusing is not done in the macro range.
When the focus mode is set to q (Macro) or
adjusted in the respective macro ranges and is not done in the standard range.
1
Use the four-way controller (23) to select [AF Setting] in the
[A Rec. Mode] menu.
2
Press the four-way controller (5).
The [AF Setting] screen appears.
3
Use the four-way controller (23) to select [Auto Macro].
4
Use the four-way controller (45) to select O (On)/P (Off).
The setting is saved.
(1cm Macro), the focus is only
3
77
Advertisement
Table of Contents
