Copying Images - Pentax R07020 Operating Manual

• When a title picture is added to the beginning of a movie: When the movie
is played back, the added still picture is played back for three seconds, and
then the movie is played back. The added still picture is used as the
thumbnail of the movie.
When a title picture is added to the end of a movie: When the movie is
played back, the movie is played back, and then the added still picture is
played back for three seconds. The thumbnail of the movie is not changed
by adding a title picture to the end of the movie.
• Only a still picture with the same aspect ratio as the movie can be set as a
title picture.

Copying Images

You can copy images from the built-in memory to the SD Memory Card and vice
versa. This function can only be selected when an SD Memory Card is inserted
in the camera.
Make sure that the camera is turned off before inserting or removing the SD
Memory Card.
1
Use the four-way controller (2345) to select p (Image
Copy) from the Playback Mode Palette.
2
Press the 4 button.
The copying method selection screen appears.
To Copy Files from the Built-in Memory to the SD Memory Card
All the images in the built-in memory are copied to the SD Memory Card at once.
Before copying the images, make sure that there is enough space on the SD
Memory Card.
3
Use the four-way controller (2) to
select [2}{].
4
Press the 4 button.
All the images are copied to the SD Memory Card.
SD
SD SD SD
Cancel Cancel Cancel
OK OK OK OK OK OK
5
145