Table of Contents
Advertisement
5
Plug the USB power adapter into the power outlet.
The power lamp blinks while charging.
When charging is finished, the power lamp turns off.
The terminal cover will not close while charging. Leave the cover open when
1
charging and do not attempt to close it.
6
Unplug the USB power adapter from the power outlet when
charging is finished.
7
Remove the USB cable from the camera.
8
Close the terminal cover.
Close the terminal cover in the opposite direction indicated by 3. While lightly
pressing on the cover, slide it away from 2 until it clicks.
• Do not use the supplied USB power adapter for any other purpose than that
of connecting to this camera and charging the designated battery. Doing
otherwise may cause a connected device to be damaged or overheated.
• The battery has reached the end of its service life when it starts to run down
soon after being charged. Replace it with a new battery.
• If the camera is connected to the power outlet but the charging indicator
fails to light, the battery may be faulty. Replace it with a new battery.
• The time required to fully charge the battery is about 120 minutes (max.).
(The charging time may vary depending on the ambient temperature and
charging conditions.) The appropriate ambient temperature for charging
the battery is 0°C to 40°C (32°F to 104°F).
• You cannot turn on the camera while it is charging.
32
Advertisement
Table of Contents
