Firmware Update; Keep Equipment Connected During Updates; System Requirements; System Requirements And Compatibility: Mac - Shure MV7 User Manual

Issue
Microphone has become
detached from the yoke.
Miscellaneous issues
General troubleshooting
Note: Contact Shure Service and Repair if you continue to experience any issues.

Firmware Update

Take advantage of additional features and design enhancements by updating the firmware on your MOTIV Desktop Application
when prompted. A notification will appear when a firmware update is available. You have the option to download the update im-
mediately or at a later time.
Tip: For best results, before updating the application, make sure that the microphone is connected to your computer. Do not
disconnect until the update is complete.
To access firmware update at a later time, tap the three dots > About > Check for Update. Tap the caret icon and if the
available firmware package is newer than the current version, tap Send to device. Contact Shure Service and Repair if you ex-
perience any issues.

Keep equipment connected during updates

Keep the MOTIV device connected to your mobile device when updating to ensure that there are no update issues.

System Requirements

System Requirements and Compatibility: Mac

• MacOS 10.13 to 10.15
• 64 bit
• Minimum 2 GB of RAM
• Minimum 500 MB of hard disk space

System Requirements and Compatibility: Windows

• Windows 10
Solution
Note: Windows update 10 v2004 (April 2020) solves this problem.
See the MV7 Yoke Assembly topic for step by step instructions for re-assembling your yoke
and assorted washers. Correct washer assembly is crucial to ensure that your microphone is
securely in place.
It may be useful to reset the app to restore functionality. Perform a hard reset by unplugging
and re-plugging the microphone.
Quit and re-start the app.
Reboot the computer.
Check for firmware update. Tap the three dots in the top right corner and select About
MOTIV > Check for Update
Shure Incorporated
12/18