NETGEAR Orbi Pro SXS80 User Manual page 90

Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80
To set the download bandwidth ratios for the SSIDs:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 28.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Settings page displays the admin WiFi settings.
Note: Even though this is the page for the admin WiFi settings, the bandwidth ratios
that you specify on this page apply to the admin WiFi network, employee WiFi
network, IoT WiFi network, and guest WiFi network. (All bandwidth ratios together
must add up to 100 percent.) Similarly, if you specify bandwidth ratios on the
employee WiFi settings page, IoT WiFi settings page, or the guest WiFi network
page, they also apply to all other WiFi networks.
5. Select the Enable Bandwidth per SSID check box.
In the Bandwidth per SSID graphic, the colored icons are enabled.
6. Specify the bandwidth ratios by moving the icons on the bandwidth line.
The icons represent the following WiFi networks:
• Blue: Admin WiFi network (Wireless 1).
• Green: Employee WiFi network (Wireless 2).
• Purple: IoT WiFi network (Wireless 3).
• Gray: Guest WiFi network.
As you move an icon, the bandwidth ratio for the WiFi network changes and the
percentage displays in the icon.
All bandwidth ratios together add up to 100 percent of the available download
bandwidth. If you change one ratio, the ratio for another WiFi network might also
change.
7. Click the Apply button.
Manage the WiFi Settings 90 User Manual