NETGEAR Orbi Pro SXS80 User Manual page 111

Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80
To change the IoT LAN settings:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 28.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup > LAN 3.
The LAN Setup page displays.
5. If you previously disabled the LAN setup for LAN 3, select the Enable LAN Setup 3
check box.
6. In the IP Address field, type the IP address.
The default IP address is 192.168.30.1.
7. In the IP Subnet Mask, type the subnet mask of the router.
The IP address and subnet mask identifies which addresses are local to a specific
device and which must be reached through a gateway or router.
The default IP subnet mask is 255.255.255.0.
8. To change the VLAN profile, from the VLAN Profile menu, select a custom VLAN
profile.
For more information about how to add a new VLAN profile, see Add a new VLAN
profile for a LAN on page 130.
9. Click the Apply button.
Your settings are saved.
If you changed the LAN IP address of the router, you are disconnected when this
change takes effect.
10. To reconnect, close your browser, relaunch it, and log in to the router.
Manage the LAN and WAN
Settings
111 User Manual