Table of Contents
Advertisement
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80
7. Click the Apply button.
Your settings are saved.
The router delivers the following parameters to any LAN device that requests DHCP:
• An IP address from the range that you defined
• Subnet mask
• Gateway IP address (the router's LAN IP address)
• DNS server IP address (the router's LAN IP address)
Set up a DHCP server for the employee LAN 2
The DHCP IP addresses for the employee LAN 2 must be part of the same IP address
subnet as the router's default LAN IP address. Using the default addressing scheme,
define a range between 192.168.20.2 and 192.168.20.254, although you can save part
of the range for devices with fixed addresses.
To set up the DHCP server for the employee LAN 2:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 28.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup > LAN 2.
The LAN Setup page displays.
5. If you previously disabled the DHCP server feature, select the Use Router as DHCP
Server check box.
6. Specify the range of IP addresses that the router assigns:
a. In the Starting IP Address field, enter the lowest number in the range.
This IP address must be in the same subnet as the router. The default starting IP
address is 192.168.20.2.
b. In the Ending IP Address field, enter the number at the end of the range of IP
addresses.
Manage the LAN and WAN
Settings
115
User Manual
Advertisement
Table of Contents
