Manage Reserved Lan Ip Addresses; Reserve An Ip Address - NETGEAR Orbi Pro SXS80 User Manual

Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
5. Select the LAN tab for the LAN that you want to disable the DHCP for: LAN 1, LAN
2, LAN 3, LAN 4, or LAN 5.
The LAN Setup page displays.
6. Clear the Use Router as DHCP Server check box.
7. Click the Apply button.
8. (Optional) If this service is disabled and no other DHCP server is on your network,
set your computer IP addresses manually so that they can access the router.

Manage reserved LAN IP addresses

When you specify a reserved IP address for a computer on a LAN, that computer always
receives the same IP address each time it accesses the router's DHCP server. Assign
reserved IP addresses to computers or servers that require permanent IP settings.

Reserve an IP address

To reserve an IP address:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 28.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
5. Select the LAN tab for the LAN that you want to disable the DHCP for: LAN 1, LAN 2,
LAN 3, LAN 4, or LAN 5.
The LAN Setup page displays.
Manage the LAN and WAN
Settings
120 User Manual