NETGEAR Orbi Pro SXS80 User Manual page 40

Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80
5. From the Internet Connection Type menu, select 6to4 Tunnel.
The page adjusts.
The router automatically detects the information in the Router's IPv6 Address on
LAN field. This field shows the IPv6 address that is acquired for the router's LAN
interface. The number after the slash (/) is the length of the prefix, which is also
indicated by the underline (_) under the IPv6 address. If no address is acquired, the
field displays Not Available.
6. Select a Remote 6to4 Relay Router radio button:
• Auto: Your router uses any remote relay router that is available on the Internet.
This is the default setting.
• Static IP Address: Enter the static IPv4 address of the remote relay router. Your
IPv6 ISP usually provides this address.
7. In the IPv6 Domain Name Server (DNS Address), select a radio button:
• Get Automatically from ISP: Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
• Use These DNS Servers: If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it also.
8. In the LAN Setup section, select an IP Address Assignment radio button:
• Use DHCP Server: This method passes more information to LAN devices, but
some IPv6 systems might not support the DHCPv6 client function.
• Auto Config: This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your
business network (the LAN).
9. (Optional) Select the Use This Interface ID check box and specify the interface ID
that you want to be used for the IPv6 address of the router's LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
10. Select an IPv6 Filtering radio button:
• Secured: In secured mode, which is the default mode, the router inspects both
TCP and UDP packets.
• Open: In open mode, the router inspects UDP packets only.
11. Click the Apply button.
Specify Your Internet Settings 40 User Manual