Edit A Reserved Ip Address - NETGEAR Orbi Pro SXS80 User Manual

Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80
6. In the Address Reservation section of the page, click the Add button.
7. In the IP Address field, type the IP address to assign to the computer or server.
The page adjusts.
8. Type the MAC address of the computer or server.
Tip: If the computer is already on your network, you can copy its MAC address from
the Attached Devices page and paste it here.
9. Enter a name in the Device Name field.
10. Click the Apply button.
The reserved address is entered into the table.
The reserved address is not assigned until the next time the computer contacts the
router's DHCP server. Reboot the computer, or access its IP configuration and force
a DHCP release and renew.

Edit a reserved IP address

To edit a reserved address entry:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 28.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
5. Select the LAN tab for the LAN that you want to disable the DHCP for: LAN 1, LAN 2,
LAN 3, LAN 4, or LAN 5.
The LAN Setup page displays.
6. Select the radio button next to the reserved address.
7. Click the Edit button.
The Address Reservation page displays.
Manage the LAN and WAN
Settings
121 User Manual