4: Connecting The Audio/Video Components - Sony HT-SF470 Operating Instructions Manual

4: Connecting the audio/
video components
How to hook up your
components
This section describes how to hook up your
components to this receiver. Before you begin,
see "Component to be connected" below for
the pages which describe how to connect the
audio/video components.
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
After hooking up all your components,
proceed to "5: Connecting the antennas" (page
24).
Component to be connected
To connect
TV
Audio components
• Super Audio CD player,
CD player
• DIGITAL MEDIA PORT
adapter
Components with HDMI jack
Video components
• DVD player, DVD recorder
• Satellite tuner, cable television
tuner
Connecting audio components
The following illustration shows how to
connect audio components such as Super
Audio CD player or CD player and DIGITAL
MEDIA PORT adapter.
You can also view the images on the TV
screen by connecting the video output of the
DIGITAL MEDIA PORT adapter to the video
input of the TV. However, depending on the
DIGITAL MEDIA PORT adapter, video
output may not be possible.
20
GB
See
page 19
page 20
page 21
page 23
A Audio cord (not supplied)
B Video cord (not supplied)
* The type of connector varies depending on the
Super Audio CD player,
CD player
Audio signal
A
L
EZW-T100
R
AUDIO IN AUDIO IN
COAX IN
AUTO
VIDEO
CAL MIC SA-CD/CD TV
DC5V 0.7A MAX
HDMI
DVD IN BD IN
DMPORT
DIGITAL MEDIA
PORT adapter
DIGITAL MEDIA PORT adapter.
For details, refer to the operating instructions
supplied with the DIGITAL MEDIA PORT
adapter.
DIGITAL ANTENNA
AM
OPT IN OPT IN
SAT/CATV
TV
ARC
SAT/CATV IN TV OUT
TV
B
l : Signal flow